Water Qulity test Kit of 5 Perameter

How to use a water test kit

You can use a Clear Response water test strip to find out how much of certain undesired elements are present in your tap, ground, or well water. aquarium water test kit can be used in pool ph tester, spas, and aquarium water tank tester. It’s a high-water-quality test kit.

Know About Water Parameter

PH – Water is classified as acidic or basic depending on its pH value, which ranges from 7 to 8.5. A pH of 7 is regarded as being pure, and a range of 6.5-8.5 is advised.

Total Hardness Of Water Test – Hardness is the amount of dissolved calcium and magnesium. Soft water can cause corrosion of your plumbing and appliances. Hard water can cause residue buildup and difficulties using soap.

Nitrite – Nitrites come from fertilizers through the runoff of water and sewage deposits. They can stimulate the growth of harmful bacteria.

Total Alkalinity – Alkalinity is the level of dissolved minerals in your water that help neutralize acidity. Water with low levels of alkalinity is more likely to be corrosive, and high levels can cause scaling.

Total Chlorine – Chlorine is added to drinking water to kill disease causing pathogens. Total chlorine is the amount of Free Chlorine + Used chlorine (chloramines) in your water. Nausea, diarrhea, and vomiting are common side effects of ingesting too much chlorine.

IMPORTANT TO KNOW

Test for 60 second

When using the 5 parameters water test strips, your results are complete (ready to compare) after dipping the test strip and
shaking off any excess water. Test strip can dipped directly into the water source being tested. Alternatively, you can feel the clear test tube and proceed to dip the strip. Upon completion, make sure to compare your results immediately.

To do this, place the handle of the test strip at the bottom of the color chart facing upwards. The test strip is no longer valid outside of a 60-second testing period. Discard the test strip after 60 seconds as any further color change will be meaningless.

Prevent altered results

Here is what you can do to prevent decreased shelf life of the strip and altered results.

• Tests for four critical parameters, including total alkalinity, nitrates, hardness, and pH.
• Color-coded test strips that are simple to use
• provides consistent readings that are accurate in only a few minutes.
• ensures the security and quality of your water supply thorough examination of all relevant parameters